Roadside dynamometer for Professionals
dynoPro GPS is a road dyno used to measure the power, torque and acceleration of passenger cars. Measurements can be taken on vehicles with any type of drivetrain. The device is intended for professional use in motorsport and vehicle diagnostics.
Description of the Kit Components
A – Protective case with foam insert B – GPS antenna C – dynoPRO GPS probe D – Charging / power cable E – Tablet (with the dynoPRO GPS app) in a protective case
All components were manufactured on CNC machine tools.
dynoPRO GPS - Quick and Effective Solution
The device features a compact, solid housing made of aluminium and plastics.
Setting up the device takes about 2 minutes, after which it is ready to measure.
The measurement requires entering the vehicle weight – weighing the vehicle is recommended.
The device has a built-in weather station measuring temperature and atmospheric pressure (-40°C + 105°C, 300 hPa-1100 hPa).
Communication with the dynoPRO GPS probe uses the Bluetooth standard. The dynoPRO GPS probe has a built-in battery providing about 5 hours of operation.
Measurement results are presented in both actual and normalised form according to the DIN70020, SAE J1349 and EEC standards. The repeatability error, keeping the same procedure and conditions, is below 1%.
The device has no time or quantity limits on the number of measurements. Free software updates. Technical support.
The device warranty is 2 years, with the option to extend it.
Device setup
Lightning-fast setup and teardown of the dyno lets you take measurements anywhere, anytime – which mobile workshops will appreciate most.
Setup and measurement with the dynoPRO dyno
Device setup consists of a few steps
- Mount the GPS antenna on the vehicle roof
- Connect the antenna to the dynoPRO GPS measurement probe and place the probe in a safe location
- Start the tablet and the software
In most cases, a power measurement requires about a 1 km stretch of road, ideally without inclines.
The measurement procedure consists of the following stages.
- Select the MEASUREMENT menu
- Define the profile of the measured vehicle (name, vehicle weight, drivetrain type)
- The measurement itself
- start the measurement in the software
- set off gently with the vehicle
- engage 3rd, 4th or 5th gear and accelerate hard to the end of the rev range, then shift into neutral and the program will start a 10 s countdown to calculate rolling and aerodynamic resistance – there are several additional options that change the measurement method
- the program calculates the vehicle’s power and torque and presents them to the user
- Generating the measurement report (the software generates a report in PDF, JPG and CSV format and allows it to be sent by e-mail or shared via any messenger)
d
User interface, sample dynoPRO measurements
Kit contents
LENOVO TAB TABLET, 10.1″ screen, 4GB RAM / 64GB Wi-Fi with the dynoPRO GPS software
The tablet included in the kit has a durable aluminium housing and a protective plastic cover.
Wireless dynoPRO GPS Bluetooth probe, with a built-in weather station
The dynoPRO GPS probe is made of aluminium. Communication uses the Bluetooth standard. The probe has a built-in GPS receiver, an ambient temperature sensor and an atmospheric pressure sensor. The dynoPRO GPS probe is powered by an internal battery providing about 5 hours of operation. The battery is charged via a USB C connector.
Accessory set – GPS antenna, USB C cable
Active GPS antenna with a magnetic mount, an SMA connector and a 2 m cable. USB C charging cable.
A durable, solidly built case made of ABS combined with polypropylene.
Technical Specifications
dynoPRO GPS probe |
|---|
|
Tablet |
|---|
|
GPS antenna |
|---|
|
Case |
|---|
|
Tablet Case |
|---|
|
Charging Cable |
|---|
|
Additional Information |
|---|
|
Downloads |
|---|
Quick start guide v1.0 GPS |
User manual v1.0 GPS |
